Suspension provides approx. 2-3"(50-75mm) of lift.
Fits Toyota Land Crusier 80 Series All Models.
Complete Kit Requires: Front and Rear Coil Springs and Shocks, Steering Damper and Caster Kit. Trim Packers may be required to trim vehicle to a maximum of 15mm per coil. Packers must be installed on the top end of the coil spring.
Important Notes:
OME 850J/863J coils and N73L/74L shocks should be installed together, although they do not comprise a kit. Fitting of N73L/74L shocks requires installation of .75" front and 1.25" rear bumpstop spacers to prevent shocks from bottoming out under full compression. These spacers are not available through OME. Other mods may be necessary (brake lines, control arms, etc.). ARB and 4x4 Connection are not responsible for improper application and/or installation.
Front Springs Quantity needed is 2.
Priced Individually.
Rear Springs Quantity needed is 2.
Priced Individually.
Front Shocks Quantity needed is 2.
Priced Individually.
Rear Shocks Quantity needed is 2.
Priced Individually.
Front Coil Spring Packers 5mm thickness.
Front Coil Spring Packers 10mm thickness.
Rear Coil Spring Packers 5 mm thickness.
Rear Coil Spring Packers 10 mm thickness.
Steering Dampner
Caster Kit Kit will increase caster 2 degrees. Caster angle will be affected when raising the vehicle. Check manufacturer's specs to determine if necessary.